John Sayers' Recording Studio Design Forum Archive

Posted: **Mon Feb 09, 2004 8:23 pm**

Knight, this one is probably most for you...for various reasons doing the 3 layers of drywall for part of my ceiling is going to be about impossible. Specifically, my wall doesn't quite make it up to the concrete ceiling by about a foot...and of course this is the wall that is between the tracking room and control/ vocal rooms.

What I CAN do is put one layer of 3/4 MDF up there. Then put insulation....will this give me enough isolation?

Posted: **Tue Feb 10, 2004 5:50 am**

Can you do a drawing of what you propose? I'm not clear whether you mean the frame doesn't reach the ceiling, or just the drywall, or?? Also, whether you're talking about one layer of MDF on each side, or just a single leaf of 3/4" MDF... Steve

Posted: **Tue Feb 10, 2004 9:57 am**

one leaf of mdf...one of drywall...the control room won't be a problem doing the drywall.

Posted: **Tue Feb 10, 2004 4:57 pm**

Sorry, I'm still not visualizing what you're trying to describe - seriously, a quick drawing would be much easier to understand... Steve

John Sayers' Recording Studio Design Forum Archive

Knightfly - Blocking properties

Knightfly - Blocking properties