Help With Material

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

jlonigro
Posts: 6
Joined: Sat Jul 16, 2005 7:22 am
Location: Long Island, NY USA

Help With Material

Post by jlonigro »

John had posted a rough sketch for me of a room I am building. I had a question regarding what material to be used where. On the Right side there is an angled wall that goes from the control room to the performance room that has what looks like insulation behind it. Isa this a standard drywall with insulation behind it or a slot resonator? If insulation is to be used what type is reccomended here? Also in the back right corner of the control room and the left corner of the adjoining room the are angled surfaced tthat look like just insulation. What would these be? The from of the control room has angled coners with main speakers inside. Again are these slotted walls?
knightfly
Senior Member
Posts: 6976
Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA

Post by knightfly »

First you need to follow this

http://www.johnlsayers.com/phpBB2/viewtopic.php?t=3231

Specifically editing your profile to include a basic location. This is a world-wide forum, not all materials are available everywhere... Steve
Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...
jlonigro
Posts: 6
Joined: Sat Jul 16, 2005 7:22 am
Location: Long Island, NY USA

Post by jlonigro »

Sorry Steve! I bet you wish you had a dime everytime you had to direct someone to that link. Does my question make sense?
Post Reply