John Sayers' Recording Studio Design Forum Archive

I appreciate useful info and kindness to John sayers ,knightfly and many members in this forum.
I visited the following useful url.

http://www.johnlsayers.com/phpBB2/viewtopic.php?t=2125

I can't see any stuff relating to USG or USG manual
but does this situation only apply to me not others in this forum?

when i attempt to right click download, the error message says that
Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. plz try again later.
when i just click the USG link url
in USG site the error massage says that ERROR 404 - URL Not Found

The page/URL you have requested does not exist. You may use the navigation links on the left or click here to access the home page.

If you are using a bookmark, please update them with references to URLs on the new USG.com.

77,

You have to register with USG before you can download the manual - start here:

http://www.usg.com/navigate.do?pageType ... architects

Then go to Gypsum Construction Handbook - register and go to the download page - - then all the way to the bottom on the left hand side you will see "dowload complete handbook".

Rod

rod gervais wrote:77,

You have to register with USG before you can download the manual - start here:

http://www.usg.com/navigate.do?pageType ... architects

Then go to Gypsum Construction Handbook - register and go to the download page - - then all the way to the bottom on the left hand side you will see "dowload complete handbook".

Rod

thank u for your kindness