Page 1 of 1
Anyone care to guess this angle?
Posted: Wed Jan 04, 2006 8:35 am
by pdlstl
I haven't been able to take enough measurements yet to figure this angle.
Any guesses?
30 perhaps?
Posted: Wed Jan 04, 2006 12:02 pm
by tmix
Earl,
Without measurements it'll be a guess...
But I am thinking it is a standard 5/12 roof pitch which would be 22.5 degrees, or possibly a 6/12 pitch which would be about 27 degrees.
Of course, I am usually wrong.
Tom
Posted: Wed Jan 04, 2006 12:58 pm
by Dan Fitzpatrick
the actual angle in the picture is about 27 degrees, but since the picture is taken at an angle, that isn't goint to be accurate. the true angle i think must be a bit larger, but figuring it out from that picture would be difficult.
of course the suggestion of 27 degrees in the previous post might be right ... maybe the angle of the picture won't change things that much.
hope that helps a little.
Posted: Wed Jan 04, 2006 2:08 pm
by pdlstl
Thanks!
I'm just trying to roughly figure cubic footage for new A/C equipment.
Tom,
This is a far cry from my little one room studio in Fort Worth huh?
Posted: Wed Jan 04, 2006 9:41 pm
by tmix
Yep!
But Still your old place was nice!
Glad to see you are still plugging on!
I am almost ready to pour my studio foundation (About 940 sq / ft) Not big but bigger than what I have.
Tom