Page 1 of 1
3bents 30cm*30cm*9m Superduct RC cost 1000dollar in korea.
Posted: Tue Feb 07, 2006 5:38 pm
by student77
30cm * 30cm * 9m (1feet * 1feet * 30feet length) superduct RC which have 3 90degree bents cost 1000 dollar in here
how much in U.s.a or other country?
i can't find price through google or search engine..
Posted: Wed Feb 08, 2006 2:36 am
by bzb
No, you wouldn't be able to find pricing on the internet - it comes in sheets from JM distributors, and you'd need to get a quote from them. You fabricate the ducts from the sheets, so price would depend if you're fabricating yourself, or paying someone to do it.
Don't know if it'll help, but in my little corner of the US, I recently received a quote from a local distributor for $60/sheet (4' x 10' x 1").
To fabricate the sheets you might also need tape, cutting tool, collar, etc.
Posted: Wed Feb 08, 2006 5:36 pm
by student77
bzb wrote:No, you wouldn't be able to find pricing on the internet - it comes in sheets from JM distributors, and you'd need to get a quote from them. You fabricate the ducts from the sheets, so price would depend if you're fabricating yourself, or paying someone to do it.
Don't know if it'll help, but in my little corner of the US, I recently received a quote from a local distributor for $60/sheet (4' x 10' x 1").
To fabricate the sheets you might also need tape, cutting tool, collar, etc.
thank u.. 1000 $ the price is for paying someone to fabricate it.
they said that because SuperDuct rc only can be fabricated by specially educated people ,they will not sell the sheets.
but there is a imitation product from korea Owens Corning which is sell only in korea.therefore u can't search the product in u.s.a, the company sell them by sheets. and the price is $90/sheet(4' x10'x 1")
and the cutting tool was 250 dollar
and the imitation sheet is called owenscorning Endura gold