Acoustic foam panels
Posted: Fri Dec 29, 2006 11:19 am
I have a large qty of SonexOne Melimine foam 2" thick 2'X4' panels left over from a industrial job. The panels are in KY at zip 42261. The panels retail large qty's over $200 per box of 8 panels, 64 square feet. They are 2" thick natural (white). Search SonexOne Acoustic foam for more info. I have over 3200 sq ft avalible, new, in boxes. Will sell large or small qty's. PM me if interested. Will sell cheap!!
James
SONEXone™ Panels
§ Softly sculpted surface pattern
§ Excellent sound absorption across all frequencies
§ Helps reduce noise, unwanted sounds and reverberation in many types of interior environments
§ Panel size of 24"x48" in 2" or 3" thickness
SONEXone Panels are a versatile product, offering effective acoustic control in a variety of applications and environments, including industrial facilities, multipurpose rooms and architectural projects. SONEXone panels are attractive and reliable, featuring (NRCs) Noise Reduction Coefficients ranging from 0.85 to 1.10. The sculpted surface of each panel deflects and disperses sound waves, allowing the open cell willtec® foam to convert sound energy into quiet, kinetic energy.
illbruck's exclusive willtec foam is Class 1 fire-rated according ASTM E 84 for flame spread and smoke density. willtec natural meets the corner burn test UL 1715.
SONEXone Panels are easy to install on any wall and/or ceiling surface with illbruck's acouSTIC™ water-based adhesive. The panels can also be used in conjunction with SONEXone Baffles, which have the same pattern but are designed to hang from ceilings in large rooms or open interior spaces.
SONEXone™ Panels Technical Specifications
Physical Data — willtec®
Material Open-cell melamine-based foam
Density 0.5 to 0.7 lbs./cubic ft. (ASTM D3574-77)
Long-Term Service Temperature 302 degrees F
Fire Resistance Class 1 per ASTM E 84 (all finishes)Meets UL 1715 (willtec natural)
Flame Spread per ASTM E 84 Natural: 5
Smoke Density per ASTM E 84 Natural: 50
Microbial Growth Passes UL 181, section 11
Fungus Resistance Rating 0 per ASTM G21
Sound Absorption
Finish Thickness Coefficients per ASTM C423-90a
125Hz 250Hz 500Hz 1kHz 2kHz 4kHz NRC MountingType
Natural (White) 2" 0.11 0.33 0.85 1.05 1.09 1.06 0.85 B
Installation Information
§ Make sure both the panels and the surface to which the panels are being applied are free of dust and dirt. If adhering to a metal surface, use a degreaser.
§ Apply a line of adhesive around the perimeter of the panel approximately 1" from the edge.
§ Apply a line of adhesive from opposite corners through the center of the panel, creating an "X".
§ Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Last, press the panel back into position and hold again for 5 seconds.
§ Wear clean cotton/canvas gloves for installation.
§ Use a sharp razor or fixed-blade knife and a metal straightedge to cut panels. For best results, cut panels on flat side.
James
SONEXone™ Panels
§ Softly sculpted surface pattern
§ Excellent sound absorption across all frequencies
§ Helps reduce noise, unwanted sounds and reverberation in many types of interior environments
§ Panel size of 24"x48" in 2" or 3" thickness
SONEXone Panels are a versatile product, offering effective acoustic control in a variety of applications and environments, including industrial facilities, multipurpose rooms and architectural projects. SONEXone panels are attractive and reliable, featuring (NRCs) Noise Reduction Coefficients ranging from 0.85 to 1.10. The sculpted surface of each panel deflects and disperses sound waves, allowing the open cell willtec® foam to convert sound energy into quiet, kinetic energy.
illbruck's exclusive willtec foam is Class 1 fire-rated according ASTM E 84 for flame spread and smoke density. willtec natural meets the corner burn test UL 1715.
SONEXone Panels are easy to install on any wall and/or ceiling surface with illbruck's acouSTIC™ water-based adhesive. The panels can also be used in conjunction with SONEXone Baffles, which have the same pattern but are designed to hang from ceilings in large rooms or open interior spaces.
SONEXone™ Panels Technical Specifications
Physical Data — willtec®
Material Open-cell melamine-based foam
Density 0.5 to 0.7 lbs./cubic ft. (ASTM D3574-77)
Long-Term Service Temperature 302 degrees F
Fire Resistance Class 1 per ASTM E 84 (all finishes)Meets UL 1715 (willtec natural)
Flame Spread per ASTM E 84 Natural: 5
Smoke Density per ASTM E 84 Natural: 50
Microbial Growth Passes UL 181, section 11
Fungus Resistance Rating 0 per ASTM G21
Sound Absorption
Finish Thickness Coefficients per ASTM C423-90a
125Hz 250Hz 500Hz 1kHz 2kHz 4kHz NRC MountingType
Natural (White) 2" 0.11 0.33 0.85 1.05 1.09 1.06 0.85 B
Installation Information
§ Make sure both the panels and the surface to which the panels are being applied are free of dust and dirt. If adhering to a metal surface, use a degreaser.
§ Apply a line of adhesive around the perimeter of the panel approximately 1" from the edge.
§ Apply a line of adhesive from opposite corners through the center of the panel, creating an "X".
§ Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Last, press the panel back into position and hold again for 5 seconds.
§ Wear clean cotton/canvas gloves for installation.
§ Use a sharp razor or fixed-blade knife and a metal straightedge to cut panels. For best results, cut panels on flat side.