John Sayers' Recording Studio Design Forum Archive

Hi,

I'm going to the final stage of my studio building, based on the designs I saw at the forum and other resources.
Here's my control room layout. I'm thinking of using wood floor on the operator area, as drawn in the picture, and the others are carpeted.
The question is, how should I treat the walls? If possible, a picture describing the treatments needed would be a good help.

Thanks in advance,
Ari

Ari - how does that fit in to the surrounding construction??

last time you posted I assumed you had decided on this plan


cheers
john

No, I was submitting the latest picture of my final design layout a while ago, but haven't got any response.
Ok here's the whole layout of the studio. The columns are removed so it was a big blank space, and now the building is already 80% completed.
The upper left part (the blue line) represents the wood partition, so the control room would be symmetrical.
So the final stage would be the acoustic treatment. Any suggestion? I have no clue where to start.

Ari