Control Room acoustics help

[josomoric]

i like the tiles. maybe you could put 100mm rigid insulation behind them and create a VPR type effect, or mix and match the absorbers with the tiles.

And glue them on LR ceiling or where?maybe if you have diy link for this composite absorbers or anything I would be gratefull.

I hanged cloud absorber.here's how it looks like:

Slika181.jpg

Slika182.jpg

Slika183.jpg

on the CR i'd suggest some of those superchunk corner absorbers in the ceiling-wall junction above the mix position and above the cloud. same on the back wall over the couch.

would this kind of 50 mm corner absorber be good enough for that positions? :

Slika184.jpg

or I should do something else.If something else please give me a link or something.

That day in supermarket I sow something else than tiles.It was fence panels :

Slika151.jpg

Slika154.jpg

Slika155.jpg

I was thinkink to put some insulation behind this fence panels and screw it up on wall.Would this be some kind of HELMHOLTZ RESONATOR ?I was thinking to place this panels in drum room or in live room, maybe even in CR

[gullfo]

on the fence - it won't be a HH effect but it will have some diffusiveness to it. putting them on angles with 100mm absorbers behind them may be interesting. i'd drop the cloud down another 600mm if that's an option. use 100mm absorbers whenever possible. 50mm really is not going to get to LF enough.