soffit mounting Mackie hr824s

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

guildonnie
Posts: 4
Joined: Thu Mar 03, 2005 12:03 pm
Location: W.Columbia,SC
Contact:

soffit mounting Mackie hr824s

Post by guildonnie »

I contacted Mackie service about soffit mounting their 824's and this was my reply.

Generally soffit mounted speakers are tuned for the specific room with equalizers and other acoustic tools. In some cases rooms have been designed with specific speakers in mind beforehand. In either case the monitors used are not those designed for near field applications. Your best bet is to use sand filled monitor stands or something similar.
Hope this helps.


Don Lee
Technical Support Rep.
Mackie/Tapco
(800) 898-3211 / (877) TAPCO69
www.mackie.com
www.tapcogear.com

Anyone have another opinion on this. I am looking for active speakers to soffit mount in my new room.
Nuendo 2 w/UAD-1
knightfly
Senior Member
Posts: 6976
Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA

Post by knightfly »

Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...
Post Reply