I just found these solid core doors listed on ebay for $20 a pop and they're pretty local to me.
[url= http://cgi.ebay.com/New-unfinished-soli ... dZViewItem]
Question I have is, if I was planning to use the following seals:
[url= http://www.acousticalsolutions.com/prod ... l_kits.asp]
Could I used these and cut them down to size and build a frame for them. Or, would I be better of getting a pre-hung door.
Also, anyone found a better deal than $175 for a similar deal on seals?
$20 doors on ebay
-
andy_eade
- Senior Member
- Posts: 345
- Joined: Tue Oct 11, 2005 4:47 am
- Location: Metro Washington DC - USA
- Contact:
-
sharward
- Moderator
- Posts: 4281
- Joined: Mon Jan 03, 2005 4:08 pm
- Location: Sacramento, Northern California, USA
- Contact:
Those links are no good. Here is a link to the door and here is a link to the seal.
Here is the correct link syntax.
Those doors look pretty cool -- someone should be an entire room with them!
Here is the correct link syntax.
Those doors look pretty cool -- someone should be an entire room with them!
-
andy_eade
- Senior Member
- Posts: 345
- Joined: Tue Oct 11, 2005 4:47 am
- Location: Metro Washington DC - USA
- Contact:
-
Pennywizz6
- Posts: 65
- Joined: Tue Mar 01, 2005 11:21 am
- Location: Shakopee, MN, USA