Attaching insulation to a door.

JohnGardner · Post by **JohnGardner** » Mon Jan 30, 2006 7:22 am

Guys,

I need to attach some rigid insulation to the back sides of my doors (inside the double door cavity)

I will wrap the insulation in cloth but I am a bit stuck how to actually attach this to the door so it stays there when the doors are opened and shut the whole time. I also have pull handles in there that ned to be navigated around some how!!

Has anyone had any experience with this?

I was thinking abaout building a 50mm timber frame that the insulation would sit inside that I could screw to the door?

You can see where I am talking about with the red X's

Thanks

JohnG

knightfly · Post by **knightfly** » Mon Jan 30, 2006 8:44 am

Impaling clips??!? Steve

JohnGardner · Post by **JohnGardner** » Tue Jan 31, 2006 5:39 am

No idea what they are Steve - can you expand on that?
JohnG

Post by **kendale** » Tue Jan 31, 2006 6:57 am

Aloha & Kia Ora John,

Perhaps these? http://www.acousticalsolutions.com/prod ... _clips.asp

Aloha

Ro · Post by Ro » Thu Feb 09, 2006 10:54 pm

I'd just glue them

It's pure for absorbsion so you might also make a little frame like the panel traps. add cloth for estethics.