sheetrock/gypsum/drywall

Plans and things, layout, style, where do I put my near-fields etc.

Moderators: Aaronw, kendale, John Sayers

krish
Posts: 25
Joined: Wed Mar 26, 2003 2:19 pm

sheetrock/gypsum/drywall

Post by krish »

i have heard that drywall have some strong qualities in terms of isolation and absorbation both. I just want to know it would be helpful to make a dead room using drywall on wooden studs lined with insulation around 3-4" or it needs some other absorber also..... i just needed a enviornment from where i can get good violins.... strings and winds........ what i can have a reflective concerate floor...... i have though to make some wall of drywall with insulation and some of with cloth covered insulation .....

krish
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

Krish - drywall is good for sound isolation but it is not an absorber of sound. To absorb sound you need various absorbers to built within the room. Go to

http://www.saecollege.de/reference_material/index.html
and read absorbers and then go to
http://johnlsayers.com/Studio/index.htm

and check out the construction pics of the studios there.


Cheers
JOhn
krish
Posts: 25
Joined: Wed Mar 26, 2003 2:19 pm

thoughts....

Post by krish »

:?: Well after going through what i have understand that deaden a room is only possible through the various absorber across different frequencies...... i think for the lows i will use hangers in my two vertical corners that are giving my wall depth around 19"..... this corners will not only works with hangers but also corner traps...... i am planning to split it into two parts one for hangers and reamining top part for corner bass trap..... on my angled wall same slot resonator tuned for low-mids 150-800.......... or may be one down to 150 also as some notes of string instruments are too low ....... i am planning to keep alive some highs as its gives a life to track and that can be done by my concerate floor only. and one more option is to make everything dead and bring down reverbation time....

any feedback?

regards
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

That sounds fine - you seem to know what you are doing. :)

cheers
John
krish
Posts: 25
Joined: Wed Mar 26, 2003 2:19 pm

a rough sketch

Post by krish »

i dont know it works or not.....
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

I'd head in this direction

cheers
john
krish
Posts: 25
Joined: Wed Mar 26, 2003 2:19 pm

great layout

Post by krish »

some querries regarding your drawing:

rear wall of room with High Frequency insulation and covered with drywall?

two slot resonator walls: tuned for which range of frequencies?

Corner traps split into two parts the lower one for acoustic hangers?

krish
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Post by John Sayers »

rear wall of room with High Frequency insulation and covered with drywall?
No exposed Insulation with a cloth cover.
two slot resonator walls: tuned for which range of frequencies?
Tuned to the low-mid frequencies.
Corner traps split into two parts the lower one for acoustic hangers?
Yes you could do that.

cheers
john
krish
Posts: 25
Joined: Wed Mar 26, 2003 2:19 pm

resonator tuned to?

Post by krish »

should i tune my wide band slot resonator for 150-800hzs...... ?
or have to treat lows down to 150hzs also?

krish
Post Reply