Just got a pair of Yamaha NS10's that I'm sofit mounting. I have been reading that they should be complemented by a Powered Subwoofer below about 100hz because they don't have good detail on the lows below that (I am a bass player, so lows are mucho important.) I am thinking of going with one Sony 8" Powered Sub. I have a limited budget. My questions are:
1. Do I need a sub for each side, or can I use just one?
2. Can I mount the sub in the bottom of the left sofit cabinet (with a bass trap in the bottom of the right cabinet) or does it need to be centered?
3. Should I sofit mount the sub?
4. Should I just blow off the sub and use just the NS10's?
5. If I just Use the NS10's do I need to attenuate the bass as
Barefoot has recommended?
Subwoofer Use & Placement with Sofit Mounted NS10's?
Moderator: Aaronw
-
- Posts: 9
- Joined: Sat Jan 28, 2006 5:00 am
- Location: Santa Barbara, CA
- Contact:
Subwoofer Use & Placement with Sofit Mounted NS10's?
Shooting Star Productions - The Sound Lab - Santa Barbara, California, USA
~Sirius Nuncius~
~Sirius Nuncius~
-
- Senior Member
- Posts: 6976
- Joined: Sun Mar 16, 2003 11:11 am
- Location: West Coast, USA
1. Do I need a sub for each side, or can I use just one?
You can use one, two is better.
2. Can I mount the sub in the bottom of the left sofit cabinet (with a bass trap in the bottom of the right cabinet) or does it need to be centered?
Subs can be soffited, but should NOT be centered in most cases - this puts the sub in a null and makes it work much harder for less bass in the room. It's usually better NOT to soffit subs, so you can change placement once the room is complete. Easier to dial in the response that way.
See this page
http://www.harman.com/wp/index.jsp?articleId=default
for several "white papers" on the subject by someone who knows.
3. Should I sofit mount the sub?
See above.
4. Should I just blow off the sub and use just the NS10's?
I wouldn't do that; NS-10's are too light in the bottom end, especially for what you want.
5. If I just Use the NS10's do I need to attenuate the bass as
Barefoot has recommended?
Possibly; otherwise there may be a "bump" in the response at the low end. I've not soffited these so I'd leave the option open (simple bass shelving control, same as most stereo amps have, adjusted to taste/flatness)
HTH... Steve
You can use one, two is better.
2. Can I mount the sub in the bottom of the left sofit cabinet (with a bass trap in the bottom of the right cabinet) or does it need to be centered?
Subs can be soffited, but should NOT be centered in most cases - this puts the sub in a null and makes it work much harder for less bass in the room. It's usually better NOT to soffit subs, so you can change placement once the room is complete. Easier to dial in the response that way.
See this page
http://www.harman.com/wp/index.jsp?articleId=default
for several "white papers" on the subject by someone who knows.
3. Should I sofit mount the sub?
See above.
4. Should I just blow off the sub and use just the NS10's?
I wouldn't do that; NS-10's are too light in the bottom end, especially for what you want.
5. If I just Use the NS10's do I need to attenuate the bass as
Barefoot has recommended?
Possibly; otherwise there may be a "bump" in the response at the low end. I've not soffited these so I'd leave the option open (simple bass shelving control, same as most stereo amps have, adjusted to taste/flatness)
HTH... Steve
Soooo, when a Musician dies, do they hear the white noise at the end of the tunnel??!? Hmmmm...
-
- Posts: 9
- Joined: Sat Jan 28, 2006 5:00 am
- Location: Santa Barbara, CA
- Contact: